Crypto pki trustpoint


crypto pki trustpoint TP-self-signed

I actually have a core transfer(4506e) related to 6 area switches(2960)..

Each switch is configured with crypto pki trustpoint TP-self-signed

WHat is that this exactly and whats its use?

Also, when i join different 2960 with core, it automatically takes this crypto config..

I dont understand this/.

Help me on this

Solved! Go to Solution.

the choices command is a security command related to PKI = public key infrastructure.

The command defines an item that can be relied on (trustpoint) with name TP-self-signed that roughly method a safety certifcate is domestically generated

This should be a default of more moderen IOS pictures as a way to put together the gadgets for secure management thru for instance SSH and using certificate

in other phrases if you are dealing with your gadgets with telnet simplest, these commands don’t have any impact for your state of affairs.

http://www.cisco.com/en/US/doctors/ios-xml/ios/security/a1/sec-cr-c5.html#GUID-0447E1FC-0851-4A3F-A727-8CAEEFB84A62

the subsequent is an example of a sequence of commands in a C1811 router taken from another thread

crypto pki trustpoint TP-self-signed-4147111382

View answer in original publish

the choices command is a safety command related to PKI = public key infrastructure.

The command defines an object that may be depended on (trustpoint) with name TP-self-signed that kind of way a security certifcate is domestically generated

This have to be a default of more moderen IOS images that allows you to put together the gadgets for stable management thru as an example SSH and the usage of certificate

in other phrases if you are coping with your devices with telnet most effective, these commands have no impact to your situation.

http://www.cisco.com/en/US/doctors/ios-xml/ios/protection/a1/sec-cr-c5.html#GUID-0447E1FC-0851-4A3F-A727-8CAEEFB84A62

the following is an example of a series of commands in a C1811 router taken from every other thread

crypto pki trustpoint TP-self-signed-4147111382

View solution in original publish

Thanks for the choices respond, it helped me.

We use ssh to manage switches

This is the choices the choices computerized configuration that transfer does itself or we must do it

can we cast off this config and if removed what will appear?

due to the fact you’re the use of SSH to control the choices switches and it isn’t always clear if authentication is based totally on certificate or other method I would not get rid of the ones instructions out of your gadgets

I have digital 3640 router on GNS3 and looking to discover it on CCP however it fails with safety certificate rejected. How do I restore this as the example on cisco help to kind instructions approximately “TP-self-signed xxxxx” do now not work, I obviously want precise wording for my setup? Can all people help please. Thanks

I actually have 841 router, after factory reset i unable to locate “crypto pki certificate chain TP-self-signed”

How can I generate “crypto pki certificate” please manual.

contemporary going for walks confing I can not see crypto pki certificate.

Exactly – this is my query – how will we discover the range to apply within the

crypto pki trustpoint TP-self-signed-1234567890

command?  It isn’t the choices serial range… the SN is in hex and has eleven characters.

How do we decide the choices 10-digit wide variety to use with the choices above command?

Exactly – that is my query – how will we discover the quantity to use in the

crypto pki trustpoint TP-self-signed-1234567890

command?  It isn’t the choices serial wide variety… the SN is in hex and has eleven characters.

How do we decide the choices 10-digit wide variety to apply with the choices above command?

I changed into also looking for that, spending three hours on net to discover a answer. 

I failed to want to just copy/paste configuration from another CISCO switch.

My trouble turned into to discover how to get those lines : 

crypto pki trustpoint TP-self-signed-2981184384enrollment selfsignedsubject-name cn=IOS-Self-Signed-Certificate-2981184384revocation-test nonersakeypair TP-self-signed-2981184384!!crypto pki certificates chain TP-self-signed-2981184384certificate self-signed 01

In truth, the answer is so easy…

conf t ip http stable-server

Do a show run, and you may se the choices TP-self-signed number and all of the relaxation…. 

I’m in the system of swapping out a transfer from our network. Just couldn’t determine out how those keys were generated on the choices antique transfer. I was positive it wasn’t SSH….  but did now not assume to test if it turned into HTTPS. Your put up genuinely helped…

Thanks for this.. sooner or later found the solution to my long term trouble..

Just needed to re-do the whole thing by means of..

#crypto key zeroize rsa

#no ip http stable-server

#crypto key generate rsa gen    

Thanks for sharing this…..Quick Question, Since the choices TP-self-signed is generated via allowing HTTPS.. Does that suggests removing the choices expired TP-self-signed certificates the use of under commands will not effect our SSH get admission to to those switches but just https.

Router(config_#no crypto pki trustpoint TP-self-signed-2591590124